mango написа:браво радваме
bobiracing059 написа:готино е колелцето
ама нали не му се търка гумата като на рам х ?
screamBoy написа:мда
все пак трябва да поддържаме широтата на мирогледа ... в смисъл да подгряваме казана - почват да се внасят TREK, почваме да гледаме за нещо друго, почват да се внасят IH - пак почваме да гледаме нещо друго
airborneone написа:screamBoy написа:мда
все пак трябва да поддържаме широтата на мирогледа ... в смисъл да подгряваме казана - почват да се внасят TREK, почваме да гледаме за нещо друго, почват да се внасят IH - пак почваме да гледаме нещо друго
За Трека ще има да ме прощаваш ама си е баси смешката това теле.
Железните кончета са си класика , само че не са по джоба на всеки, да не кажа, че на малко хора са по джоба.
kamikadze написа:... Trek не правят читави рамки <confused> това ли се опитваш да ми обясниш <popcorn> О бледолики airborneone <bowdown> да бъде извисен твоя разум да бъде свято тойто име <bowdown> ...
Lory каза...
the tubes set are Easton like the old Banshee or not?
July 14, 2007 7:50 AM
Keith Scott каза...
The tubes are custome hydro-formed 7005 T6 Al tubes (not easton) but easily as strong.
July 14, 2007 12:49 PM
Jay MacNeil каза...
Easton doesn't do any hydroforming and couldn't actually produce the tube shape required... and I did contact Rick at Easton.
If you're a materials engineer you'll also know that its very difficult to do 7005 with crazy shapes because its not a soft as 7005... this helps a bit.
www.brucescycleworks.com/tips/tip18.html
We've already had a university test these tubes beyond what they expected because of the unique shape.
Of course Keith forgot to bring me a copy of the report so I can't quote actual numbers.
At the end of the day your dealing with some really really strong tubes with a shape that makes them even stronger.
July 14, 2007 3:31 PM
Keith Scott каза...
hahaha oh yeah... forgot to bring that report out, woops!
Basically when the Head tube was mechanically loaded it took a force of 670kg before the headtube ovalised slightly (and the test equiptment actually broke!!) and the tubes were still within the elastic modulour of the material.
kamikadze написа:Trek не правят читави рамки confused това ли се опитваш да ми обясниш popcorn О бледолики airborneone bowdown да бъде извисен твоя разум да бъде свято тойто име bowdown
you're a materials engineer you'll also know that its very difficult to do 7005 with crazy shapes because its not a soft as 7005...
Потребители, разглеждащи този форум: 0 регистрирани и 10 госта